User Manual

Chapter 3 — Troubleshooting and Maintaining the PB50
PB50 Portable Label Printer User’s Guide 39
Possible PB50 Error Icons and Messages
Error Icon Error Message Description
Pause The printer is paused.
Paper out The printer is out of paper. Load a
new roll of media. For help, see
“Loading Media” on page 9.
Test feed not
done
The printer did not perform a test
feed before it printed out test labels.
It is important to perform a test feed
because it calibrates the sensor. Press
the Feed button to perform a test
feed.
‘
Printhead hot The printhead is overheated and
needs to cool down. Wait for printing
to resume automatically.
Upgrading The printer is loading new firmware.
LSS too high,
LSS too low
These errors can occur when you run
a test feed without any media
installed, or if you have incorrect
media settings.
Load the printer with media (see
“Loading Media” on page 9), run
Test mode (see “Using Test Mode”
on page 19), and select the
appropriate media type.
IP configuration
error
The printer is trying to acquire an IP
address from the network. Wait for
the printer to complete the task
before taking any action.
IP link error ????
Field out of label You are attempting to print in an area
that extends beyond the print
window. See the programmer’s
reference manual for your type of
firmware (IPL or Fingerprint) for
information on how to set the media
parameters.