User Manual

Chapter 2 — Configuring the PB50
26 PB50 Portable Label Printer User’s Guide
• Bluetooth parameters - connect/disconnect - compose BT
address
• Bluetooth parameters - security - compose PIN:
3 Scan the bar code labels with the Bluetooth scanner.
4 Will the printer blink in response??
Setting Up 802.11 Radio Communications
The PB50 can have an internal 802.11 b/g radio to transfer and
receive data using wireless communications. This manual
assumes that you have already set up your wireless
communications network including your access points. The
following procedures include information on setting up wireless
security for both IPL and Fingerprint versions of the PB50.
The PB50 supports these authentication modes: none, WEP,
WPA Personal and Enterprise mode, WPA2 Personal and
Enterprise mode (802.1x authentication).
Understanding Bluetooth Radio Icons
Icon Description
The Bluetooth radio is on and the printer is not connected to
a serial cable.
The Bluetooth radio is turned off. The Bluetooth radio turns
off when you connect a serial cable.
WPA and WPA2 Enterprise mode currently support PEAP,
TTLS, and LEAP. For LEAP authentication, EAP is not
supported.
Understanding 802.11 Radio Icons
Icon Description
Excellent signal
Strong signal
Good signal
Poor signal