User Manual

Chapter 2 — Configuring the PB50
20 PB50 Portable Label Printer User’s Guide
communication ports are printed on a label when you exit
Dump mode.
4 Press Feed to exit Dump mode.
After you exit Dump mode, the printer returns to Ready mode.
For more information on Dump mode, see “Troubleshooting
Communication Problems” on page 42.
Using Extended Test Mode
You can use Extended Test mode to run additional diagnostic
tests. Additional options include printing specific test labels,
entering Dump mode, and resetting to factory defaults.
To enter Extended Test mode
1 Make sure that the printer is loaded with media.
2 Press the media cover release button to open the media cover.
3 Press the Standby button to turn the printer off.
4 Press Feed and Standby buttons at the same time until
CLOSE PRINTER DOOR appears on the screen.
5 Close the media cover. You are now in Extended Test mode.
• Press to cycle through the options.
• Press to select a test option.
•Press to exit Extended Test mode.
Sample Extended Test Mode Screen
TEST LABELS
CHESS