User's Manual
Table Of Contents
- User Guide Cover
- Chapter 1: Introduction
- Chapter 2: Getting to Know the Wireless-G CompactFlash Card
- Chapter 3: Setting Up the PDA
- Chapter 4: Installing the CompactFlash Card
- Chapter 5: Connecting to a Wireless Network
- Chapter 6: Configuring the Wireless-G CompactFlash Card with the Wireless Network Monitor
15
Chapter 5: Connecting to a Wireless Network
Connect to a Wireless Network
Wireless-G CompactFlash Card
5. Power Management is a power saving mode. To enable Power Management, select On. To disable Power
Management, select Off. Then, click Finish.
6. You w ill return to the
Select Profile screen. Click OK.
The installation of the Wireless-G CompactFlash Card is complete.
Figure 5-11: Power Management
Figure 5-12: Select Profile