User's Manual

4 MobileLAN WA21 Radio Replacement Instructions
Removing a Radio and the Antenna Cable Assembly
If you are replacing a malfunctioning radio or if you are
replacing one type of radio with another type of radio, you must
remove the existing radio and antenna cable assembly.
To remove a radio
1 Lift the antenna cables off the radio.
Retaining
Clip
Radio
Antenna
cable
Antenna
socket
WA21I001.eps
2 Carefully pry one end of the retainer clip off the radio and
remove the clip.
3 Pull apart the spring clips on either side of the radio until the
radio tilts up. Gently rock the radio back and forth while
pulling it out to remove it from the mini-PCI connector.
WA21I009.eps
Retaining
clip (2 places)sO
4 Unscrew the antennas for the radio you are removing.