User's Manual Part 2

Bar CodesAppendix —C

368 700 Series Color Mobile Computer User’s Manual

Bar Code Labels

You can change some settings on your 700 Series Computer by scanning

the following Code 39 bar code labels.

S You can use the Unit Manager application to set the Automatic Shutoff,

Volume, Backlight Timer, or Key Clicks parameters (starting on page

352).

S You can use the Un it Manager application or the Data Collection con-

trol panel to set the three Virtual Wedge parameters (starting on page

325).

Note: When you use a bar code creation utility to make a scannable bar

code label, the utility probably adds opening and closing asterisks automat-

ically. Asterisks are included here for translation purposes.

Audio Volume

Note: The Audio Volume parameter information is on page 356.

Turn Audio Off

*$+BV0*

Set Audio Volume to very quiet

*$+BV1*

*$+VB1*

Set Audio Volume to quiet

*$+BV2*

Set Audio Volume to normal (default)

*$+BV3*

Set Audio Volume to loud

*$+BV4*

Set Audio Volume to very loud

*$+BV5*