User's Manual

Programming—Chapter 7
277700 Series Color Mobile Computer User’s Manual
EncryptionStatus()
Call this function to set the desired encryption status.
Syntax
UINT EncryptionStatus( UINT mode );
Parameters
NDIS_ENCRYPTION_1_ENABLED WEP is enabled; TKIP and AES are not enabled, and a transmit
key may or may not be available. (same as
NDIS_RADIO_WEP_ENABLED)
NDIS_ENCRYPTION_DISABLED Indicates that AES, TKIP, and WEP are disabled, and a transmit
key is available. (Same as NDIS_RADIO_WEP_DISABLED)
NDIS_ENCRYPTION_NOT_SUPPORTED Indicates that encryption (WEP, TKIP, and AES) is not supported.
(Same as NDIS_RADIO_WEP_NOT_SUPPORTED)
NDIS_ENCRYPTION_1_KEY_ABSENT Indicates that AES , TKIP, and WEP are disabled, and a transmit
key is not available. (Same as NDIS_RADIO_WEP_ABSENT)
NDIS_ENCRYPTION_2_ENABLED Indicates that TKIP and WEP are enabled; AES is not enabled, and
a transmit key is available.
NDIS_ENCRYPTION_2_KEY_ABSENT Indicates that there are no transmit keys available for use by TKIP
or WEP, TKIP and WEP are enabled; and AES is not enabled.
NDIS_ENCRYPTION_3_ENABLED Indicates that AES, TKIP, and WEP are enabled, and a transmit
key is available.
NDIS_ENCRYPTION_3_KEY_ABSENT Indicates that there are no transmit keys available for use by AES,
TKIP,orWEP,andAES,TKIP,andWEPareenabled.
Return Values
ERROR_SUCCESS when successful,
ERR_QUERY_FAILED when the query failed, or
ERR_CONNECT_FAILED if a connection with the radio failed.
Remarks
None.
Definitions
#ifdef DYNAMIC_LOADING
typedef UINT (*PFN_EncryptionStatus)(UINT mode);
#else
UINT EncryptionStatus(UINT mode);
#endif