User's Manual

ProgrammingChapter —7
228 700 Series Color Mobile Computer U ser’s Manual
S –Iaddr (wher e addr is in the form of a.b.c.d)
Sets the preferred 6920 Communications Server (optional).
S –Llog (where log is either “0” or “1”)
Sets the state of logging. Default is 0 (disabled).
S –Nsec
Specifies the number of seconds to wait before initially starting FTP
server services.
S –Pport
Sets the UDP port on which the network announcement will be sent.
Default port is 52401.
S –Qport
Sets the port on which the FTP Server will listen for connections.
Defaultportis21.
S –Rdir
Sets the FTP mount point to this directory. Default is the root folder of
the object store.
S –Tscript
Sets the script name for the 6920 Communications Server to process.
S –Uurl
Sets the default URL for this device.
S –Z“parms”
Sets extended parameters to be included in the network announcement.
Configurable Parameters Via the Registry Editor
The following parameters receive default values during the installation of
the Intermec FTP Server components. A few of the parameters are visible
in the r egistry by default, but most must be created in order to modify the
default behavior of the FTP server.
BlockSize
Setting this parameter configures the Intermec FTP Server to transmit and
receive Ethernet packets using the specified data block size. By default, the
FTP server transmits and receives data using a 64K data block size. Adjust-
ing this value may be useful in certain wireless TCP/IP installations.
Key
HKLM\Software\Intermec\IFTP
Value Type
REG_DWORD - data block size, in bytes.
Valid Range
0x100-0x10000 (256-65536 decimal).
Default
65536