User's Manual

Network SupportChapter —4
156 700 Series Color Mob ile Computer User’s Manual
Telus and Bell Mobility Activation
Activation of Bell Mobility and Telus are similar to the first portion of the
Sprint activation process. Follow the instructions for manual activation
using the Bell Mobility Watcher.CAB or Telus Watcher.CAB file to install
the applicable application. Enter the activation lock codes and phone num-
bers as requested.
Username, Passwor d, S ID Information
Bell Mobility Telus
Username 10 digit phone
number@1xbell. ca
10-digit phone
[e-mail]
Password Original Voice Mail system pass-
word (usually a 4 digit number)
This is available from the activat -
ing organization.
The 11 -digit ESN printed inside
the 760 Computer battery
compartment, beg ins with 099.
SID 16420 16422
WWANInit Demo Program
Make sure your 760 Computer with CDMA card is activated and data
provisioned.
You must use a Secure Digital storage card with only the
WWANINITxxxxx.CAB file in the “SDMMC/Cabfiles” directory, where
“xxxxx” is the version number.
You can download this CAB file from the Intermec web site, via the fol-
lowing:
1 Select Service & Support > Developers Support from the blue naviga-
tion bar on the Intermec home page.
2 Select 700 Color Support from the Developers Support navigation co-
lumn on the left side of the screen.
3 Select Downloads from beneath the 700 Color Support selectioninthe
Developers Support navigation column on the left side of the screen.
4 Under the Tools category, scroll down to “WWANInit xxx Connection
Program-WWAN Radios,” then click Download
Note: Other CAB files in the “SDMMC/Cabfiles” directory may cause
problems with testing — remove or uninstall these before proceeding.