User's Manual

Network SupportChapter —4
126 700 Series Color Mob ile Computer User’s Manual
CORE
The Intermec CORE application provides a framework for various mod-
ules that let you configure and manage your Intermec products. These
modules are software plug-ins that can be configuration tools, such as the
802.11b radio configuration module, or they can provide information on
your environment, such as a battery life module.
CORE modules are collections of specific information. Each module can
display general and detailed information. Tap the General and Details tabs
near the bottom to switch between general and detailed information. Note
that not all modules have detailed information.
Activating CORE
CORE is built into the operating system of every 700 Color Computer.
To run CORE for the first time, select Start > Programs > File Explorer,
select “\Flash File Store\Apps\CORE,” then tap the CORE executable file.
After CORE is run on the 700 Color Computer, tap Start > Programs >
Core to access this application henceforth.
Install an Available Radio Module
To install an available radio module onto your 700 Color Computer, tap
Modules > Add/Remove, select a module from the bottom Available box,
then tap Add to put the selected module in the upper Installed box. Click
OK to exit the Add/Remove Modules screen.
Loading a Radio Module
To load or switch to another radio module installed on the 700 Color
Computer, tap Modules > Choose Module, select a module from the
Installed Modules box, then tap Choose to initialize and begin using that
module.
To learn more about this application, see its online help. Tap Start >
Programs > File Explorer and select “\Flash File Store\Apps\CORE,” then
tap the corehelp .HTM file.