User Manual

Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer
Understanding the Control Panel
The PB22/PB32 control panel contains four buttons, a liquid crystal
display (LCD), and one LED indicator. Use the four buttons to
navigate the menu system and perform functions on the PB22/PB32
printer. See the following tables to understand the buttons, the menu
system, and what the LED means.
OK
SETUP:
SER-COM
Standby button Info button
Feed button
Setup button
Ready-to-Work
indicator
Understanding How to Use the PB22/PB32 Buttons
Button
Name Button Function
Feed Press to advance label or receipt paper. The amount of
media that feeds is dependent on the type of media you
are using. It will advance by 5 mm (0.2 inch), feed out
an entire label, or feed a configured length of media
based on your media and settings.
If the printer is printing, pressing this button causes
the printer to pause. Press the button again to resume
printing.
Setup Press to display the Setup menu. Not used with ESC/P
firmware.
Standby Press to put the printer in Standby mode. In Standby
(Power) mode, power to the radio, the display, and the
backlight are turned off.
Press to turn the printer back on and put in Ready
mode.
PB22/PB32 Portable Label and Receipt Printer User’s Guide 3