User Manual

Chapter A — Specifications
Print Speed and Resolution
Print speed: 4 ips (100 mm/s)
Resolution: 203 dpi (8 dots/mm)
Print Technology
Printhead: Direct thermal
Maximum print width: PB22 55.88 mm (2.2 in)
PB32 83.82 mm (3.3 in)
Media Specifications
Minimum gap and black mark length: 3.17 mm (0.125 in)
Minimum gap, black mark, and notch length: 12.7 mm (0.50 in)
Minimum notch length: 6.35 mm (0.25 in)
Minimum notch width: 12.7 mm (0.50 in)
Black mark width: Full width of media
Core inside diameter: 19.05 mm (0.75 in)
10.16 mm (0.40 in for receipt paper)
Roll outside diameter: PB22 57.15 mm (2.25 in)
PB32 67.31 mm (2.65 in)
Tracking1 Center
Minimum caliper for label with liner and receipts: 0.05 mm (0.002 in)
Maximum caliper for label with liner and receipts: 0.165 mm (0.0065 in)
Maximum caliper for tags: 0.15 mm (0.006 in)
Minimum media length: 12.7 mm (0.5 in)
Maximum media length: Continuous
Receipt roll stock media is supplied as a continuous roll. Label, tag,
and fanfold media use repeat indicators for non-continuous media.
Gap, notch, and black marks are used as repeat indicators:
• Gap: Label and fanfold media
• Notch: Tag media
• Black mark: Label, tag, and fanfold media
PB22/PB32 Portable Label and Receipt Printer User’s Guide 53