User Manual

Chapter 3 — Troubleshooting and Maintaining the PB22/PB32
Cleaning the Printer
To properly maintain your PB22/PB32, you should clean it at the
recommended intervals.
To avoid possible personal injury or damage to the printer,
never insert any pointed or sharp objects into the printer.
Use only the cleaning agents specified in this section. Intermec
is not responsible for damage caused by any other cleaning
materials used on this printer. Clean the printer with a cotton
swab saturated with alcohol.
PB22/PB32 Mobile Label Printer: Identifying the parts of the PB22/PB32 to
clean regularly
.
Tear bar
Paper sensor
Label taken
sensor
Platen roller
Label gap sensor
Printhead
Cleaning the PB22/PB32 Printer
Printer Part Cleaning Method Cleaning Interval
Printhead Use 70% isopropyl alcohol on
After every five rolls of media
a cotton swab to clean the or more often if necessary.
print elements from end to
end.
PB22/PB32 Portable Label and Receipt Printer User’s Guide 50