User's Manual

Chapter 1 — Using the PW50 Workboard Printer
6 PW50 Workboard Printer User’s Guide
Installing the Battery
Make sure you fully charge the battery before you use your PW50. You
can charge the battery before or after you install them into the PW50.
To install the battery
1 Lay the PW50 upside down on a flat surface.
2 Insert the battery with the tab facing away from the front control
panel.
3 Insert the edge of the battery under the lip of the PW50 and then
push down until you hear the battery latch click.
Charging the Batteries
There are two ways to charge the PW50 battery:
• Connect AC power to the printer and charge the battery while it is
in the PW50.
• Charge the battery in the AC18 4-bay battery charger.