Product Info

578-100-0xx Revision C Page 1 of 2
*578-100-0xx*
*578-100-0xx*
Compliance Statement Insert
Device Name: Hand-held Computer Model Number: 6110
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36
th
Avenue West
Everett, WA 98203 USA
[phone]
CAUTION: See users guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can
result in personal injury, fire, or battery explosion.
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals
approved by Intermec Technologies Corporation. The use of accessories other than those recommended or changes to this product
that are not approved by Intermec Technologies Corporation may void the compliance of this product and may result in the loss of
the users authority to operate the equipment.
This device complies with part 15 of the FCC and Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the radio of television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
INTERMEC RFID 2450 PC Card Radio Users FCC ID: EHARFID2450PCC-5, Canada: xxxxxxxxxx
WARNING: per the FCC and Canadian RF (radio frequency) exposure requirements,
(1) Antennas must be supplied and installed as recommended by Intermec Technologies to ensure compliance to RF exposure
requirements.
(2) This device has been tested for compliance with a separation distance of 2.5-cm (1 inch) from the terminal top and 0.5-cm (1/4
inch) from the terminal back to a person's body. The operating configurations of this device generally do not support normal
operation while it is carried in pockets or holsters next to a person’s body. The user shall not touch the terminal top (antenna)
and is to remain 2.5-cm (1 inch) from the front of the antenna while the transmitter is in use. Operation of the terminal while
the unit is in the hand provides the 0.5-cm (1/4-inch) distance requirement for safe operation next to the body.
(3) RF safety requirements mandate this device cannot be co-located with other transmitters.
WARNING: Canada Users of RFID 2450 PC Card Radio: To prevent radio interference to the licensed service, this device is
intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing. The end user is responsible to obtain the license.