User's Manual Supplement

3
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
• EN 60950-1:2001
For body and head worn operation, this product has been tested and found compliant to the
CENELEC EN 50361 standard for RF exposure when used with the Intermec accessories supplied
or designated for this product. Use of other accessories may not ensure compliance with these RF
exposure guidelines. Specific Absorption Rate, or SAR, is a measurement of radio frequency energy.
The CENELEC standard permits a maximum SAR value of 2.0 W/kg. The highest measured SAR
value for this product when worn on the body, as described in this user guide, is 0.176 W/kg.
The transmitter module’s output power is 27 mW. The products using this module are intended for
business and industrial environments. They should not be used in residential environments and by
children.
This product is marked with this logo and uses radio frequency bands that are
not harmonized throughout the European Community.
The following table indicates the areas of intended use of the equipment and any known restrictions.
Country of Intended Use License
Yes No Required Restrictions Details
Austria X
Belgium X
Cyprus X
Czech Republic X
Denmark X
Estonia X
Finland X
France X
Germany X
Greece X
Hungary X
Ireland X
Italy X
Latvia X
Lithuania X
Luxembourg X
Malta X
The Netherlands X
Poland X
Portugal X
Slovakia X
Slovenia X
Spain X
Sweden X
United Kingdom X
Other non-EU:
Iceland X