Exhibit J: User Manual-WA21 & WA22 FCC ID: HN2MPCI3A-20
Part No. 072831-001 Important WA21/WA22 Information! Contents For Users in the United States and Canada.......................................................................... 2 For Users Outside of the United States and Canada ............................................................ 3 Pour les utilisateurs en dehors du Canada et des Etat-unis ................................................... 3 Für Benutzer außerhalb von Kanada und den Vereinigten Staaten.......................................
For Users in the United States and Canada Place this supplement in your manual. Federal Communications Commission Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation.
For Users Outside of the United States and Canada Place this supplement in your manual. This product complies with EN55022, EN55024, and EN 60950 as required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage Directive 73/23/EEC as amended by 93/68/EEC. Safety Agency Approvals This device is UL and cUL Listed (UL 1950/C22.2 #950) and TÜV GS Licensed (EN 60950) for safety. Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22.
Für Benutzer außerhalb von Kanada und den Vereinigten Staaten Legen Sie diese Ergänzung in Ihr Handbuch. Europäische Übereinstimmungserklärung Dieses Produkt entspricht EN55022, EN55024, und EN 60950 in Übereinstimmung mit der EMC-Richtlinie 89/336/EWG, abgeändert durch 92/31/EWG, und der Richtlinie für Niederspannung 73/23/EWG, abgeändert durch 93/68/EWG. Sicherheitszulassungen durch Prüfstellen Dieses Gerät ist in die UL- und die c-UL-Liste (UL 1950/C22.2 Nr.
Para Usuarios Fuera de Canada o de los Estados Unidos Por favor, coloque este suplemento dentro de su manual. Declaración de conformidad europea Este producto cumple con las normas EN55022, EN55024, y EN 60950 de acuerdo a lo establecido por la directiva de EMC 89/336/CEE corregida por 92/31/CEE y por la directiva referente al bajo voltaje 73/23/CEE corregida por 93/68/CEE. Aprobación de organismos de seguridad Este dispositivo está listado por UL y por cUL (UL 1950/C22.
WA21/WA22 Manual Supplement *072831-001* *072831-001* 6001 36th Avenue West Everett, WA 98203 U.S.A. www.intermec.com © 2002 Intermec Technologies Corp.
Patent information Humidity N 48V 315 mA IP 54 -25°C to 70°C (-13°F to 158°F) -30°C to 70°C (-22°F to 158°F) -30°C to 0°C (-13°F to 32°F) Power over Ethernet (optional) electrical rating Environmental rating Operating temperature Standard Heater (optional) Heater and insulated bag (optional) -40°C to 70°C (-40°F to 158°F) ~100 to 240 V 1.0 to 0.5A 50 to 60 Hz 2.63 kg (5.
Start the utility. Mounting the WA21 -25˚C to 70˚C (-13˚F to 158˚F) -30˚C to 0˚C (-22˚F to 32˚F) Place the WA21 with heater option in an insulated bag (Part No. 068216) before using a mounting bracket kit. Wall Wall -30˚C to 70˚C (-22˚F to 158˚F) Use a mounting bracket kit to mount the WA21 with heater option so that the LEDs face down. Enter the new IP address of the access point. C Enter the Ethernet MAC address of the access point (printed on a label on the access point).
Heading 1 Click Software Downloads. *072829-001* *072829-001* MobileLAN access WA22 Quick Start Guide MobileLAN access System Manual (Part No. 067150). Intermec Web site at www.intermec.com. © 2002 Intermec Technologies Corp. All Rights Reserved 6001 36th Avenue West Everett, WA 98203 U.S.A. www.intermec.com To order access point accessories and antennas, contact your local Intermec representative. • • 526 g (1.16 lb) ~100 to 240 V 1.
Wireless #2 Flashes when a frame is transmitted or received on the radio port for the radio installed in radio slot 2 (if a second radio is installed). 1 Defining the LEDs and Ports Wireless #1 Flashes when a frame is transmitted or received on the radio port for the radio installed in radio slot 1. Power Remains on after the WA22 boots.
