Exhibit O: User Guide 2 FCC ID: HN2MG18
Quick Start Guide P/N 962-054-029 Revision B March 2001 700 Series Mobile Computer P/N 962-054-029 Revision B *962054029*
700 Series Quick Start Guide Packing List Check to ensure that you receive these items: Product Warranty Card 700 Mobile Computer Compliance Statement -2
700 Series Quick Start Guide End User License Agreement End User Software License -3
700 Series Quick Start Guide Getting Started The Main Components Navigational key Esc (Escape) Scanning LED Action key Power Status ON/OFF Backlight (Gold + 3) Contrast (Gold + 1 or 2) BkSp (Back Space) Gold Front ENTER IrDA Speaker Stylus Battery compartment Back Exterior Features -4
700 Series Quick Start Guide First Thing Before Using: Charge the battery four hours. 2 1 Connecting to Charger Booting Your Computer The following steps outline the initial boot and Pocket PC load on your 700 Series Mobile Computer. 1. The bootloader which resides in flash, loads the operating system from the CompactFlash card into RAM. 2. The first time your computer is started you may have to calibrate your display screen.
00 Series Quick Start Guide 3. The AutoRun feature of Pocket PC searches for the AutoRun.exe in the \2577 folder on the CompactFlash card. If found, the program executes. If no applications are auto started then the “Today” screen appears. Pen Calibration Utility 1. Press [Gold] and [0] to open the Start menu. 2. Use the navigational key to scroll down to settings and press [Enter]. You need to get to the System tab. 3.
