User's Manual

RFID HW GUI User Manual
- 16 - Apr 26, 2011
5.1.
5.1.5.1.
5.1. Tag Setting Function
5.1.1. Set EPC：
It will allow you to modify a tag’s EPC, select and alter the “New EPC” section to the new EPC
you desire, then press “OK” to rewrite as shown in Figure 20.
Note: The default setting for the “Current Access Password” is 00-00-00-00. For any other
settings, please reference the Class 1 Generation 2 UHF Air Interface Potocol Standard “Gen 2”
at http://www.epcglobalinc.org/standards/uhfc1g2.
Figure 20
 Pass Message：
When the tag is re-written successfully, the message confirms with a response
“Set EPC to New Tag value “as shown in Figure 21.
Figure 21