User's Manual

Specifications
IM4 Module Integration Guide 17
Specifications
General Specifications
Physical
description
PCMCIA Type II cards
Weight 34.0g ±2.8 g (1.2 oz ±0.2 oz)
Te m pe ra t ur e Operating: -20°C to 55°C (-4°F to 131°F)
Storage: -40°C to +70°C (-40°F to 158°F)
Humidity (Operating
Temperature)
0-95% relative humidity, non-condensing process
Transceiver Specification
Frequency range Europe (Future): 865.6 to 867.6 MHz hopping
Europe (Current): 869.525 fixed
U.S.A.: 902 to 928 MHz hopping
Tari
Return Data Rates
15-25 μS
146 Kbps FMO
53 Kbps DRM
Modulation PRASK
Coding Pi: from reader to tag Miller/FM0: from tag to reader
RF output impedance 50 Ohms with better than 10 dB return loss
Dwell time 50 mS
Bus interface PCMCIA or ASCII serial (16C650 serial port)
Air Interface protocol ISO 18000-6b, ISO 18000-6c, EPC Gen 1 – Class 1, EPS Gen 2
– Class 1
FCC Compliant to Part 15
Power Supply Specifications
Operating voltage Minimum: 4.5V
Maximum: 5.5V
On IM4, digital regulated to 3.3V
Standby current Typical: 2 mA
Maximum: 5 mA
Read current Typical: 1100 mA
Maximum: 1250 mA
Tx circuits, Rx circuits, VCO, temperature sensor
Ripple Maximum: 100 mV
Peak-to-peak
Timing
• Standby to active
• Channel Switching
Typical 1.5 mS; Maximum: 2 mS
Internal time not seen by the host
Maximum: 30 μS
Tx on a channel to Tx on any other channel
IM11
?
? see spec. EPC1 Gen 2
m-PCI
6.25
set channel to 4, 7, 10 or 13
865.7 - 867.5 MHZ
?
mini-PCI card, (dimensions lightly oversized
from the standard)
?
, other countries contact Intermec sales.
?
?
ETSI EN 302 208