User's Manual

Antenna Requirements
16 IM4 Module Integration Guide
Intermec, in association with Kathrein, formerly known as Scala, provides
antennas for the IM4. Kathrein supports the RFID industry with special
antenna products for many RFID applications.
For antenna integration support, contact:
Kathrein Inc., Scala Division
Attention: Dan Fowler
P.O. Box 4580
Medford, OR 97501 U.S.A.
Tel: [phone]
Cell: 541-840-9889
Fax: [phone]
e-mail: [e-mail]
Web: www.kathrein-scala.com
805-610-001 Patch, Linear-Polarized,
8.0 dBi, 60”, N(RP)
2.4 dB 21.8 cm x 19.8 cm x 5.8 cm
(8.6 in x 7.8 in x 2.3 in)
805-616-002 Patch, Circular-Polarized,
0 dBi, 2.5”, MMCX
N/A 7.9 cm x 7.9 cm x 0.6 cm
(3.1 in x 3.1 in x 0.25 in)
805-622-002 Patch, Circular-Polarized,
6.5 dBi, N(RP)
2.4 dB 25.9 cm x 63.5 cm x 5.8 cm
(10.2 in x 25 in x 2.3 in)
805-623-002 Patch, Circular-Polarized,
5.5 dBi, N(RP)
2.4 dB 25.9 cm x 39.1 cm x 5.8 cm
(10.2 in x 15.4 in x 2.3 in)
805-626-001 Patch, Linear-Polarized,
6.0 dBi, N(RP)
2.4 dB 15.5 cm x 34.0 cm x 4.8 cm
(6.1 in x 13.4 in x 1.9 in)
805-629-001 Patch, Circular-Polarized,
7.0 dBi, N(RP)
2.4 dB 31.2 cm x 31.2 cm x 8.9 cm
(12.3 in x 12.3 in x 3.5 in)
A270001-02 Log, Linear-Polarized,
7.0 dBi, N(RP)
2.4 dB 27.9 cm x 12.7 cm x 21.6 cm
(11 in x 5 in x 8.5 in)
IM4– Intermec-Approved 915 MHz RFID Antennas (continued)
Intermec Part
Number
Description
Cable
Loss
Dimensions
IM11
omit this page if possible