User's Guide
Table Of Contents
- Document Change Record
- Customer Support
- Who Should Read This Manual
- Related Documents
- Use the IP30
- About the IP30
- Use the Battery
- Attach or Remove the IP30
- Attach or Remove the IP30 from the CN70 or CN70e Mobile Computers
- Attach the IP30 to the CK70 or CK71 Mobile Computers
- Attach the IP30 to the CN3B or CN3F Mobile Computers
- Attach the IP30 to the CN4 Series Mobile Computer
- Attach the IP30 to the CK3 Series Mobile Computer
- Attach the IP30 to the CK61 Series Mobile Computer
- About Pairing the IP30 with the Mobile Computer
- Create and Use RFID Applications
- Upgrade and Troubleshoot the IP30
- Specifications
Chapter 2 — Create and Use RFID Applications
IP30 Handheld RFID Reader User Guide 29
2 Download and install the RFID Mobile Demo Kit onto your
mobile computer. For information on how to install applications
onto your mobile computer, see your mobile computer user’s
manual.
Configure RFID Settings
This section explains how you use Intermec Settings to change the
settings for the RFID module in the IP30. As you install and test
applications, you can configure the RFID settings for the best system
performance.
1 Go to Intermec Settings on your mobile computer.
2 For Windows Mobile 5.0, Windows CE, or Windows Embedded
Handheld 6.5 tap RFID > Reader 1 > RFID Module. The RFID
Module screen appears.
For Windows Mobile 6.1, tap RFID > Enable RFID Service, and
select the Enable RFID Service check box.
3 Change the RFID settings as needed. For help, see the Basic Reader
Interface Programmer’s Reference Manual or the Intermec Settings
Command Reference Manual.
4 Save your settings.
Configure the BRI Server
The IP30 BRI server handles communications between your
application and the RFID module. You can configure many settings
for the BRI server.
1 Go to Intermec Settings on your mobile computer.
2 Tap RFID > Application Connection. The BRI application server
settings appear.
3 Change the BRI application server settings as needed. For help, see
the Basic Reader Interface Programmer’s Reference Manual or the
Intermec Settings Command Reference Manual.
4 Save your settings.