User's Guide
Table Of Contents
- Document Change Record
- Customer Support
- Who Should Read This Manual
- Related Documents
- Use the IP30
- About the IP30
- Use the Battery
- Attach or Remove the IP30
- Attach or Remove the IP30 from the CN70 or CN70e Mobile Computers
- Attach the IP30 to the CK70 or CK71 Mobile Computers
- Attach the IP30 to the CN3B or CN3F Mobile Computers
- Attach the IP30 to the CN4 Series Mobile Computer
- Attach the IP30 to the CK3 Series Mobile Computer
- Attach the IP30 to the CK61 Series Mobile Computer
- About Pairing the IP30 with the Mobile Computer
- Create and Use RFID Applications
- Upgrade and Troubleshoot the IP30
- Specifications
Chapter 1 — Use the IP30
26 IP30 Handheld RFID Reader User Guide
a Select Program Files > Intermec > Network. The Network
screen appears.
b Double-tap the Bluetooth Reader Wizard icon.
3 Tap Add Reader. The wizard advances to the next screen.
4 Select how you would like to find your reader (the default is
Search) and then click Next. The computer starts discovering
readers. The Devices list appears.
5 Select the reader you want to connect to and then tap Next.
6 When prompted to add the reader to your device list, tap Yes.
7 Enter the passcode for your reader. The default passcode for
Intermec Bluetooth readers is 0000.
8 Tap Next. The computer connects to the reader and displays the
remote device information.
9 Tap Finish.
10 Refresh Intermec Settings to see the Bluetooth reader in the RFID
menu. You can now configure and modify your device. For help,
see “Configure RFID Settings” on page 29.
Note: The Devices list shows all Bluetooth-enabled data collection
devices, including RFID readers. To connect to the IP30, verify that
the serial number you select matches the serial number on the
bottom of the IP30 antenna.