User's Guide
Table Of Contents
- Document Change Record
- Customer Support
- Who Should Read This Manual
- Related Documents
- Use the IP30
- About the IP30
- Use the Battery
- Attach or Remove the IP30
- Attach or Remove the IP30 from the CN70 or CN70e Mobile Computers
- Attach the IP30 to the CK70 or CK71 Mobile Computers
- Attach the IP30 to the CN3B or CN3F Mobile Computers
- Attach the IP30 to the CN4 Series Mobile Computer
- Attach the IP30 to the CK3 Series Mobile Computer
- Attach the IP30 to the CK61 Series Mobile Computer
- About Pairing the IP30 with the Mobile Computer
- Create and Use RFID Applications
- Upgrade and Troubleshoot the IP30
- Specifications
Chapter 1 — Use the IP30
IP30 Handheld RFID Reader User Guide 25
About Pairing the IP30 with the Mobile
Computer
Before you can use the Bluetooth version of the IP30, you must
establish a connection between the IP30 and mobile computer by
scanning a 2D bar code on the IP30 (70 series) or by using the Wireless
Reader Wizard.
Pair the IP30C by Scanning a Bar Code (70 Series)
The 2D bar code on the IP30C automatically launches the Wireless
Reader Wizard, enters the Bluetooth Device address for the IP30, and
enters the pass code.
1 Download and install the latest Windows Embedded Handheld
operating system and RFID support onto your 70 series mobile
computer. For help, see the 70 Series Mobile Computer User
Manual.
2 Make sure your Bluetooth radio is enabled on your mobile
computer. For help, see the 70 Series Mobile Computer User
Manual.
3 Use the mobile computer to scan the 2D bar code on the IP30.
An initial screen appears letting you know that the IP30 is connecting
to the mobile computer and then another screen appears letting you
know when the pairing is complete.
Pair the IP30 by Using the Wireless Reader Wizard
1 Make sure your Bluetooth radio is enabled on your mobile
computer. For help, see the mobile computer user’s manual.
2 For Windows Mobile 5.0, Windows Mobile 6.1, or Windows
Embedded Handheld 6.5 select Start > Settings > System and tap
the Wireless Readers icon. The Wireless Reader Wizard appears.
For Windows CE, select Start > Programs > Windows Explorer.
The Windows Explorer screen appears.
Note: The USB version of the IP30 establishes a connection with your
mobile computer when the IP30 USB adapter is plugged in.