User's Guide
Table Of Contents
- Document Change Record
- Customer Support
- Who Should Read This Manual
- Related Documents
- Use the IP30
- About the IP30
- Use the Battery
- Attach or Remove the IP30
- Attach or Remove the IP30 from the CN70 or CN70e Mobile Computers
- Attach the IP30 to the CK70 or CK71 Mobile Computers
- Attach the IP30 to the CN3B or CN3F Mobile Computers
- Attach the IP30 to the CN4 Series Mobile Computer
- Attach the IP30 to the CK3 Series Mobile Computer
- Attach the IP30 to the CK61 Series Mobile Computer
- About Pairing the IP30 with the Mobile Computer
- Create and Use RFID Applications
- Upgrade and Troubleshoot the IP30
- Specifications
Chapter 1 — Use the IP30
20 IP30 Handheld RFID Reader User Guide
If you are using the AR7 Common Access Card Reader:
a Insert the AR7 into the docking connector until it snaps into
place.
b Insert the right-angle USB cable into the USB port on the
bottom of the AR7.
c Wrap the Velcro strap around the AR7 to secure the USB cable.
6 Configure the IP30. For help, see “Configure RFID Settings” on
page 29.