User's Guide
Table Of Contents
- Document Change Record
- Customer Support
- Who Should Read This Manual
- Related Documents
- Use the IP30
- About the IP30
- Use the Battery
- Attach or Remove the IP30
- Attach or Remove the IP30 from the CN70 or CN70e Mobile Computers
- Attach the IP30 to the CK70 or CK71 Mobile Computers
- Attach the IP30 to the CN3B or CN3F Mobile Computers
- Attach the IP30 to the CN4 Series Mobile Computer
- Attach the IP30 to the CK3 Series Mobile Computer
- Attach the IP30 to the CK61 Series Mobile Computer
- About Pairing the IP30 with the Mobile Computer
- Create and Use RFID Applications
- Upgrade and Troubleshoot the IP30
- Specifications
Chapter 1 — Use the IP30
4 IP30 Handheld RFID Reader User Guide
About the LEDs
Use the following table to understand the status LEDs on your IP30.
LED Icon Descriptions
LED Icon LED Name Description
Ready-to- Work
™
indicator
Blue LED remains on when an the IP30
is connected to the mobile computer.
For more information, see the next
section.
Data Communications Flashes when there is data
communications between the reader
and the mobile computer.
RFID Transmit Flashes when the IP30 RFID reader is
transmitting data.
Tag ID Flashes when an RFID tag ID is
successfully read or written to.
Battery Indicates the battery status:
• Green: The battery is fully charged
(more than 80% capacity).
• Orange: The battery is charged (from
20% to 80% capacity).
• Red: The battery is low (less than 20%
capacity).