User's Manual Part 2

Intermec EasyCoder F4 – Installation & Operation Ed. 274
Chapter 9 Options
Interface Boards
A number of different interface boards are available for use with the
EasyCoder F4. The interface boards are either factory fi tted or can
easily be fi tted by an authorized service technician.
The EasyCoder F4 can accommodate one such interface board.
The interface boards for the EasyCoder F4 are presently:
• Parallel Interface Board (IEEE 1284)
• Double Serial Interface Board
• Industrial Interface Board
• EasyLAN 100i Interface Board (Ethernet)
Refer to Appendix 3 “Interfaces” for more information on interface
boards.
RFID Option
RFID (radio frequency identification) option modules are available
for use with the EasyCoder F4. The RFID option modules are
either factory fitted or fitted by an authorized service technician.
The EasyCoder F4 can accommodate only one option module. The
RFID option module occupies the same chassis slot as other inter-
face boards listed in Chapter 9, and cannot be used in conjunction
with, or in addition to, any of the optional interface boards listed.