User's Manual Part 2

Intermec EasyCoder F4 – Installation & Operation Ed. 2 71
Chapter 9
Options
Introduction
The EasyCoder F4 is designed to provide a high degree of fl exibility
by means of a modular design. By adding a collection of optional
devices to the basic concept, the printer can be adapted for a variety
of applications. Most options can easily be installed by the operator
whereas some options should be installed by an authorized service
technician, or are only available as factory-installed options.
Below is a description of some of the many options available
for EasyCoder F4.
Rewinder &
Guide Shaft
3" Adapter
Quick-Load Guides
Label-Taken
Sensor
Short Side Door
1.5" Paper
Spool
Long Side Door