User's Manual Part 2

Intermec EasyCoder F4 – Installation & Operation Ed. 2 51
Chapter 6 Setting Up the Printer
Setup Parameters, cont'd.
Print Defi nes, cont'd.
Test Label #1
Test Label #2
Test Label #3 Test Label #4
Test Label #5
681 ohms/8 dots
UART1 9600-8-N-1 RTS/CTS DISABLE ENQ/ACK DISABLE XON/XOFF DATA TO HOST DISABLE DATA FROM HOST DISABLE NEW LINE CR/LF REC BUF 300 TRANS BUF 300 PRINT CONFIG STARTADJ 0 STOPADJ 0 XSTART 24 WIDTH 808 LENGTH 1800 MEDIA TYPE LABEL (w GAPS) PAPER TYPE DIRECT THERMAL LABEL CONSTANT 85 LABEL FACTOR 40 CONTRAST +0% TESTFEED 12 3 HEAD RESIST 681 PRINT SPEED 100 Odometer [km] 0 Model F4 Hardware version 3.0 Ram 4096 ( k) Flash 0+2048 +1016 (k) External 0 (k) c: 1819504 bytes free FIRMWARE Fingerprint 7.31 MCS1147 xx-xx-00 xx:xx:xx m3k slav0782 27-MAY-97 17:09:25 [0] No keyboard slave [1]