User's Manual

EasyLAN Wireless User’s Manual
3-12
Reload Firmware Page
2. In the Reload on submit row, choose Enable to reload the firmware when you click
submit. If you choose Disable, the firmware is reloaded when you reboot the
EasyLAN Wireless (
Guess on my part
). For help, see “Rebooting the EasyLAN
Wireless” earlier in this chapter.
3. In the Firmware File Name row, enter the file name for the firmware.
Do you need
to enter path information?
4. In the TFTP Server Address row, enter the IP address for the TFTP server in the
form n.n.n.n where n is from 0 to 255.
Is the firmware supposed to be on the
TFTP server?
5. In the Netware Server Name row, enter the name of the Netware server.
Why is this
information needed?
6. Click Submit. If you enabled reload on submit, the firmware is sent to the EasyLAN
Wireless, and a message page appears letting you know the reload was successful.
If you disabled reload on submit, a message page appears letting you know that the
firmware is ready to load.
7. Click OK to return to the Configuration and Management page. If you need to reset
the EasyLAN Wireless, see “Resetting the EasyLAN Wireless” later in this chapter.