User's Manual
EasyLAN Wireless User’s Manual
3-8
2. In the Server Search box, click Start. The name of the EasyLAN Wireless, MAC
address, IP address, and signal appear for all of the EasyLAN Wireless found.
If the EasyLAN Wireless Admin utility does not find your EasyLAN Wireless right
away, click Stop and make sure that the EasyLAN Wireless is on and configured
properly. For help with initially configuring the EasyLAN Wireless, see “Setting
Radio and Network Communications” in Chapter 1.
Note:
If the wireless signal is less than 50% on the Search screen, printing performance
could be affected. To improve the signal strength, try moving the EasyLAN Wireless
closer to the computer or access point and away from other radio devices, such as
Bluetooth
wireless devices, microwave ovens, or cordless phones.
You are now ready to manage the EasyLAN Wireless.
To reboot the EasyLAN Wireless
1. Open the EasyLAN Wireless Admin utility and search for the EasyLAN Wireless
on your network. For help, see the previous section, “Searching for EasyLAN
Wireless on Your Network.”
2. Select an EasyLAN Wireless, open the Set Up menu, and select Reboot. The
Reboot Server Password dialog box appears.
3. Enter the password for the EasyLAN Wireless and click OK. A message box
appears telling you that the EasyLAN Wireless is rebooting. When the EasyLAN
Wireless has finished rebooting, the Search screen appears.
Is any information lost
or settings changed when option reboots?