User's Manual

EasyLAN Wireless User’s Manual
2-32
7. Enter the IP address of the EasyLAN Wireless as the Remote System Name.
8. Enter the desired EasyLAN Wireless service name (BINARY_P1 for binary files or
TEXT_P1 for text files) as the Remote Printer Name.
9. Check the box next to Remote Printer is on BSD System.
10. If you choose to, accept the default values for the remaining items.
11. Click OK to configure the printer.
12. Print using the
lp –d
command with the EasyLAN Wireless name.
Note:
The configuration for HP Distributed Print Services and for earlier versions of
HP/UX is slightly different.
You can also configure the EasyLAN Wireless as a JetDirect card using HP/UX. To do
this, you need the HP UNIX Host Printing Software (part of HP’s JetAdmin for UNIX).
Configuring for IBM AIX
1. Using the SMIT program, enter
smit
and select Devices.
2. Select Printer/plotter.
3. Select Manage remote printer subsystem.
4. Select Client services.
5. Select Remote printer queues.
6. Select Add a remote queue.
7. Enter the following remote queue settings:
•
Name of queue to add (user selectable)
•
Activate the queue (Yes)
•
Destination host (EayLAN Wireless IP address; or if you have configured the
/etc/hosts file, use the name of the EasyLAN Wireless that you specified in that
file)
•
Name of queue on remote printer (BINARY_P1 for binary files or TEXT_P1
for text files)
•
Name of device to add (user selectable; for example, lp0)
8. Print using the
lp –d
command.