User's Manual

Configuring and Managing the EasyLAN Wireless
2-27
2
Configure NetBIOS Page
2. In the NETBEUI row, select Enable to enable communication over the LLC
protocol.
3. In the NETBIOS/IP row, select Enable to enable communication over the Internet
protocol.
4. In the Enabled Services row, click the displayed port to configure the services for
that port. For help, see “Configuring Port Services” later in this chapter.
5. Read the name of the EasyLAN Wireless from the Computer Name row.
6. In the Domain Name row, enter the name of the domain that contains the PCs that
will print to this printer.
7. In the WINS Server Method row, select the server method:
•
Set to Auto to use DHCP to set the primary and secondary WINS server IP
addresses. To use DHCP, you must set the boot method in the Configure
TCP/IP page to either Auto or DHCP.
•
Set to Static to always use the values you enter in the Primary WINS Server IP
Address row and Secondary WINS Server IP Address row. To disable WINS
registration, select Static and set the primary and secondary WINS server IP
addresses to 0.0.0.0.
8. In the Primary WINS Server IP Address row, enter the IP address for the primary
WINS server.