User's Manual

EasyLAN Wireless User’s Manual
2-26
Configuring Additional Queues
If you want to configure additional queues, you must use the Novell NWAdmin utility
(this program is usually found in the Public directory on the NetWare file server).
To configure additional queues and ports
1. Start the NWAdmin utility and make sure you are in the right context. (If not, select
NDS Browser from the Tools menu and then browse for the desired context.)
2. Select the container where you want the print queue to reside.
3. From the Tools menu, select Print Services Quick Setup.
4. Browse for the NetWare Print Server by clicking on the button next to the Print
Server Name window.
5. Enter the name of the NDS Printer for the desired port in the Name box (for
example, XCD_04ECBA_P1).
6. Leave the Type box at the default Parallel setting.
7. Select the desired banner type.
8. Enter any desired name for the print queue.
9. If necessary, browse for the volume.
10. Click Create to create the print queue. You are now ready to use the queue from a
NetWare workstation.
Configuring for NetBIOS
Use the Web browser interface to configure for NetBIOS.
To configure for NetBIOS
1. From the Configuration and Management page, click Configure NetBIOS. The
Configure NetBIOS page appears. For help opening the Configuration and
Management page, see “To open the Web browser interface” earlier in this chapter.