User's Manual

Configuring and Managing the EasyLAN Wireless

2-25

Configuring the NetWare Parameters

1. From the Configuration and Management page, click Configure NetWare. The

Configure NetWare screen appears. For help opening the Configuration and

Management page, see “To open the Web browser interface” earlier in this section.

2. In the Netware row, select Enable or Disable.

3. To configure services for the port shown in the Enabled Services row, click the link

for the port. For help, see “Configuring Port Services” later in this chapter.

4. Read the information in the Active Servers and Queues row to find out what servers

and queues are enabled.

5. To configure bindery file servers, click Configure Bindery File Servers. For help,

see “To configure bindery file servers and service bindery file servers” in the

previous section.

6. In the Frame Type field, select the frame type: Auto, 802.3, Ethernet II, 802.2, or

SNAP.

7. In the Netware Password row, enter the password the EasyLAN Wireless uses to

communicate with the file server in the Enter new password field and Confirm new

password field. To disable the password, enter a single space.

8. Click Submit. A page appears letting you know that your changes were successful.

9. Click OK to return to the Configuration and Management page.