User's Manual

EasyLAN Wireless User’s Manual
2-24
2. If you want to remove a server, select a server from the dropdown list and click
Remove.
3. If you want to add a server, enter a server number in the field and click Add.
4. Click Back in your browser toolbar to return to the previous page.
Or click Main to return to the Configuration and Management page.
Configuring for the NetWare Network
This section explains how to use the Web browser interface to configure NetWare
parameters and how to configure additional queues using the Novell NWAdmin utility.
Note:
Intermec recommends you use the Novell 32-bit client on your Windows PC
instead of the Microsoft NetWare client because it allows direct configuration of print
queues without the need for a Novell utility like NWAdmin or PCONSOLE.
The EasyLAN Wireless automatically makes itself known on a NetWare network. The
default NetWare Print Server name is XCD_xxxxxx_P1 where xxxxxx is the last six
digits of the MAC address. Note that the NetWare Print Server name is used for either
NDS or bindery mode configuration.
If you are configuring the first port with the Web browser interface, the NDS Printer
Name for this port is automatically assigned as XCD_xxxxxx_P1 where xxxxxx is the
last six digits of the MAC address. If you are using an alternate configuration method
like NWAdmin, you may assign any unique name for the printer. For help configuring
the first port, see “Configuring the Ports” earlier in this chapter.
You extensively use the Print Server and Printer names while configuring. Note that
these names are actually the names of the EasyLAN Wireless NetWare services. If
desired, you can change the default names using the Web browser interface. For help,
see “Configuring the Port Services” earlier in this chapter.