User's Manual

EasyLAN Wireless User’s Manual
2-20
4. In the Port Type row, select Console to send console commands to the EasyLAN
Wireless through the serial port, or select Print Server to print to the EasyLAN
Wireless.
5. In the Baud Rate row, select the baud rate for the port.
6. In the Bits per character row, select 7 or 8 bits.
7. In the Stop Bits row, select 1 or 2 stop bits.
8. In the Parity row, select None, Odd, Even, Mark, or Space.
9. In the Flow Control row, select None, XON/XOFF, or RTS/CTS.
10. Click Submit. A page appears letting you know that your changes were successful.
11. Click OK to return to the Configuration and Management page.
Configuring the Port Services
Use the Web browser interface to configure port services.
If you clicked on a service name in a network parameter page, such as Configure
Netware, go to Step 3.
To configure the port services
1. From the Configuration and Management page, click Configure Services. The
Configure Service screen appears. For help opening the Configuration and
Management page, see “To open the Web browser interface” earlier in this chapter.