User's Manual

EasyLAN Wireless User’s Manual
2-16
9. From the WEP Key dropdown list, select either disabled, 64-bit, or 128-bit wired
equivalent privacy. If you selected disabled, skip to Step 12.
10. From the WEP Key Index dropdown list, select the 64-bit or 128-bit key you are
using.
11. In the 64 Bit Key fields or the 128 Bit Key fields, enter the hexadecimal digits for
each key: 10 digits for 64-bit encryption and 26 digits for 128-bit encryption.
12. Click OK to accept your changes and return to the Search screen.
Click Cancel to reject your changes and return to the Search screen.
Note:
If you are having trouble configuring an EasyLAN Wireless, click Cancel in the
Configuration screen. In the Search screen, click Clear to clear the list of print servers,
and start a new search. For help searching for the EasyLAN Wireless, see “To search
for the EasyLAN Wireless” earlier in this chapter.
To configure the other parameters in the Configuration screen, see “Using the EasyLAN
Wireless Admin Utility” in the previous section.
Configuring the Access and Update Passwords
Use the Web browser interface to configure the access and update passwords. The
default passwords are access. The access password is the password you use to get to the
Configuration page of the Web browser interface. The update password is the password
you use to reload the firmware.
To configure the access and update passwords
1. From the Configuration and Management page, click Configure Password. The
Configure Password page appears. For help opening the Configuration and
Management page, see “To open the Web browser interface” earlier in this chapter.