User's Manual

Configuring and Managing the EasyLAN Wireless
2-15
2
Configuration Dialog Box
Note:
The Serial Number field, Firmware Rev. field, and MAC Address field are
read only fields. You cannot change the values of these fields.
4. In the Server Name field, enter the name for the EasyLAN Wireless. The default
name is XCD_
xxxxxx
where
xxxxxx
is the last six digits of the MAC address.
5. In the Password field, enter the password that you use to access this Configuration
dialog box.
6. From the RF Channel dropdown list, select the wireless channel (0 to 11) the
EasyLAN Wireless uses to communicate.
7. In the SSID field, enter the service set identifier for the subnetwork.
8. From the Wireless Mode dropdown list, select one of the following options:
•
Auto. Select this mode to have the EasyLAN Wireless select the appropriate
mode based on what network activity is happening at the time.
•
Pseudo Ad-hoc. Select this mode when your network has some stations without
access points.
•
Ad-hoc. Select this mode when all of the stations on the network are IEEE
802.11 compliant.
•
Infrastructure. Select this mode when all data is being passed through a central
access point.