User's Manual

Configuring and Managing the EasyLAN Wireless
2-11
2
Configuration Dialog Box
Note:
The Serial Number field, Firmware Rev. field, and MAC Address field are
read only fields. You cannot change the values of these fields.
4. In the Server Name field, enter the name for the EasyLAN Wireless. The default
name is XCD_
xxxxxx
where
xxxxxx
is the last six digits of the MAC address.
5. In the Password field, enter the password that you use to access this Configuration
dialog box.
6. In the IP Address field, enter the IP address for the EasyLAN Wireless in the form
n.n.n.n
where
n
is a number from 0 to 255.
7. In the Workgroup/Domain field, enter the Microsoft Workgroup or Domain that
prints to this printer. If your network uses NetBIOS or NetBEUI, enter the name of
the PC that prints to this printer.
8. In the Subnet Mask field, enter the subnet mask that the EasyLAN Wireless
communicates in using the form
n.n.n.n
where
n
is a number from 0 to 255.
9. From the Boot Method dropdown list, select one of the following options:
•
Auto sets the EasyLAN Wireless to try to get an IP address using DHCP,
BOOTP, and RARP. If it cannot get an IP address using these methods, Auto
changes to Static.
•
DHCP sets the EasyLAN Wireless to use the dynamic host configuration
protocol to get an IP address.