User's Manual

EasyLAN Wireless User’s Manual
2-10
2. In the Server Search box, click Start. The name of the EasyLAN Wireless, MAC
address, IP address, and signal appear for all of the EasyLAN Wireless found.
If the WPAdmin utility does not find your EasyLAN Wireless right away, click
Stop and make sure that the EasyLAN Wireless is on and configured properly. For
help with initially configuring the EasyLAN Wireless, see “Setting Radio and
Network Communications” in Chapter 1.
Note:
If the wireless signal is less than 50% on the Search screen, printing performance
could be affected. To improve the signal strength, try moving the EasyLAN Wireless
closer to the computer or access point and away from other radio devices, such as
Bluetooth

wireless devices, microwave ovens, or cordless phones.
You are now ready to configure the EasyLAN Wireless.
To configure the TCP/IP parameters using the EasyLAN Wireless Admin utility
1. Open the WPAdmin utility and search for the EasyLAN Wireless on your network.
For help, see the previous procedure, “To search for the EasyLAN Wireless.”
2. Select an EasyLAN Wireless and click Configure. The Configure Password dialog
box appears.
3. Enter the password for the EasyLAN Wireless. The default password is access. The
Configuration dialog box appears.