User's Manual

EasyLAN Wireless User’s Manual
2-6
You are now ready to configure the TCP/IP parameters.
To configure the TCP/IP parameters using the Web browser interface
1. From the Configuration and Management page, click Configure TCP/IP. The
Configure TCP/IP page appears. For help opening the Configuration and
Management page, see “To open the Web browser interface” earlier in this section.
2. In the TCP/IP row, select Enable or Disable.
3. In the Enabled Services row, click the port you want to configure services for. For
help, see “Configuring Port Services” later in this chapter.
4. In the IP Address field in the IP Address row, enter the IP address for the EasyLAN
Wireless using the form n.n.n.n where n is from 0 to 255. After you click Submit,
you will have to enter the new IP address in the Address/Go to line of your browser
to get the Web browser interface back.
5. In the Subnet Mask field in the IP Address row, enter the subnet mask that the
printer is communicating in using the form n.n.n.n where n is from 0 to 255.
6. In the Gateway field in the IP Address row, enter the IP address of the gateway or
router your EasyLAN Wireless communicates with.