User's Manual

EasyLAN Wireless User’s Manual
2-4
Configuring the TCP/IP Parameters
You can use the Web browser interface or the EasyLAN Wireless Admin utility to
configure the following TCP/IP parameters:
•
Enable or disable TCP/IP
•
Enable port services
•
IP address
•
Subnet mask
•
Gateway or router IP address
•
Boot method
Note:
If you are using DHCP on your network, the EasyLAN Wireless may have
automatically acquired valid IP settings, and no further configuration is necessary.
Using DHCP may work well if your DHCP server allows the EasyLAN Wireless to
keep its IP address permanently, but in most cases, you want to use a static IP address
outside the range reserved for DHCP (see your DHCP server manual for details). You
want a static IP address for when you configure your printer port and to use the Web
browser interface.
Using the Web Browser Interface
Before you can use the Web browser interface, you need to open it.
To open the Web browser interface
1. Start your Web browser.
2. In the Address (Internet Explorer) or Go to (Netscape) line, enter the IP address for
the EasyLAN Wireless, and press
Enter
. The following page appears.