User's Manual

EasyLAN Wireless User’s Manual
1-6
Installing the EasyLAN Wireless
Before you install the EasyLAN Wireless, make sure that you have properly installed
the 802.11b wireless equipment and software you are using to communicate to the
printer as described in the documentation that came with that equipment. Also make
sure that you have loaded media and ribbon into the printer. For help, see the quick start
guide for your printer.
Attaching the Antenna
•
Screw the antenna onto the antenna connector, and bend the antenna so that it points
up.
illustration of antenna being attached
For best performance, position the printer and antenna so that the antenna has a line-of-
sight exposure to the access point or wireless device that it communicates with.
The following antennas and extension cable are also available:
illustration of antenna 2.4GHz 5dBi dual flat patch, recommended for office
corridors, hospital halls, and retail establishments. Part
No. 067262
illustration of antenna 2.4GHz 5dBi omnidirectional, recommended for open
areas, warehouses, and industrial sites. Designed for
outdoor use. Part No. 063363
illustration of extension
cable
12-foot long cable with magnetic base at the antenna
connector. Use with the antenna that came with the
EasyLAN Wireless. Part No. 060749