User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CV30 Fixed Mount Computer
- Chapter 2 - Understanding Windows CE
- Chapter 3 - Configuring the CV30
- Configuring the CV30 Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CV30
- Understanding the Wireless Network
- Using WPA Security
- Using Static WEP Security
- Using 802.1x Security
- Using LEAP Security
- Choosing Between Funk and Microsoft Security
- Configuring Funk Security Using Intermec Settings
- Configuring Funk Security Using the Profile Wizard
- Configuring WEP Security With Profile Wizard
- Configuring WPA-PSK Security With Profile Wizard
- Configuring WPA2-PSK Security With Profile Wizard
- Configuring PEAP Security With Profile Wizard
- Configuring TLS Security With Profile Wizard
- Configuring TTLS Security With Profile Wizard
- Configuring LEAP Security With Profile Wizard
- Configuring EAP-FAST with Profile Wizard
- Configuring Microsoft Security
- Loading a Certificate
- Disabling Security
- Chapter 4 - Developing and InstallingApplications
- Chapter 5 - Troubleshooting andMaintaining the CV30
- Appendix - Specifications
- Index
Chapter 4 — Developing and Installing Applications
70 CV30 Fixed Mount Computer With Windows CE User’s Manual
Installing Applications on the CV30
There are several ways you can install applications on the CV30:
• You can package your application as a cabinet (.cab) file.
• If you have a simple application, you may only need to deliver
the .exe file.
• You can copy a directory structure that contains the
application, supporting files, DLLs, images, and data files.
Intermec recommends using .cab files to install your applications.
The CV30 uses standard Windows Mobile .cab files and will
install third-party .cab files. You can have your .cab files place
your application in any of these memory locations on the CV30:
• The Object Store or the Flash File Store. The Object Store is a
DiskOnChip® flash that looks like a disk. The Flash File Store
is an area of storage which is embedded in a section of the
system flash memory. This storage is not erased during a reset.
Although it might be erased during the reflashing process. In
addition to storing applications and data files, you have the
option to store persistent registry to the Flash File Store
region.
• The optional SD card. If you are using an SD card, this
should be the primary location to place application
installation files.
• The non-volatile Flash File Store region of the storage. Use
the small non-volatile Flash File Store region to hold .cab files
that rebuild the system at clean boot or install applications
from a .cab file into the Flash File Store so that they are
“ready-to-run” when you perform clean boot. Since the flash
in the system has a limited number of write cycles, do not use
the Flash File Store for excessive writing.
There are several ways you can install files and applications on the
CV30:
• SmartSystems server
•ActiveSync
•SD card
•FTP server