User's Manual

Chapter 3 — Configuring the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 61
2 Enter a network name. If the network was detected, the
network name is entered and cannot be changed.
3 (Optional) To connect to an ad-hoc connection, select This is
a computer-to-computer (ad-hoc) network; wireless access
points are not used.
4 Follow these steps to disable authentication:
a Set Authentication to Open if WEP keys are not required
or to Shared when WEP keys are required for association.
b Set Data Encryption to Disabled.
Follow these steps to enable WEP encryption:
a Set Authentication to Open if WEP keys are not required
or to Shared when WEP keys are required for association.
b Set Data Encryption to WEP.
c To change the network key, clear The key is provided
automatically check box, enter the new Network key,
and then select the appropriate Key index.
Follow these steps to enable WPA authentication:
a Set Authentication to WPA.