User's Manual

Chapter 3 — Configuring the CV30
46 CV30 Fixed Mount Computer With Windows CE User’s Manual
a For Prompt for Credentials, choose Enter credentials
now.
b Select User name and type your user name.
c Select User Password and type a user password.
d For Validate Ser ver Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your CV30. For help,
see “Loading a Certificate” on page 62.
b For Validate Ser ver Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
6 Save your settings.
To enable WPA-PSK or WPA2-PSK with Funk security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Choose Communications > 802.11 Radio > Funk Security
> Profile.
4 For Association, choose WPA or WPA2.
5 For 8021x, choose None.
6 For Pre-Shared Key, enter the pre-shared key or the
passphrase.
Note: You can use Prompt for credentials to
troubleshoot your connection to the network if you have
problems. By choosing Enter credentials now, you are
storing the user name and password on the device so that
you will not need to enter it every time.
Note: You must have the date on the CV30 set correctly
when you enable Validate Server Certificate.