User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CV30 Fixed Mount Computer
- Chapter 2 - Understanding Windows CE
- Chapter 3 - Configuring the CV30
- Configuring the CV30 Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CV30
- Understanding the Wireless Network
- Using WPA Security
- Using Static WEP Security
- Using 802.1x Security
- Using LEAP Security
- Choosing Between Funk and Microsoft Security
- Configuring Funk Security Using Intermec Settings
- Configuring Funk Security Using the Profile Wizard
- Configuring WEP Security With Profile Wizard
- Configuring WPA-PSK Security With Profile Wizard
- Configuring WPA2-PSK Security With Profile Wizard
- Configuring PEAP Security With Profile Wizard
- Configuring TLS Security With Profile Wizard
- Configuring TTLS Security With Profile Wizard
- Configuring LEAP Security With Profile Wizard
- Configuring EAP-FAST with Profile Wizard
- Configuring Microsoft Security
- Loading a Certificate
- Disabling Security
- Chapter 4 - Developing and InstallingApplications
- Chapter 5 - Troubleshooting andMaintaining the CV30
- Appendix - Specifications
- Index
Chapter 3 — Configuring the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 35
To discover the printer with Bluetooth device discovery
2 Tap Search to initiate printer discovery. All Bluetooth printers
discovered within range appear in the devices list.
3 Select the printer you want to connect to and then tap OK.
If your preferred printer does not appear, make sure the
printer is turned on and discovery is enabled, and then repeat
Steps 1 through 3.
4 Tap Print Test Page. The printer prints out the test page.
1 Select Start > Settings > Control Panel > Wireless
Printing. The Wireless Printing wizard appears.