User's Manual

Chapter 1 — Using the CV30 Fixed Mount Computer
10 CV30 Fixed Mount Computer With Windows CE User’s Manual
•Using the Reset button
If you try both of the following options to reset the CV30 and
you cannot restore system operation, you may need to perform a
clean boot. For more information, see “Troubleshooting the
Boot Process (Clean Booting)” on page 89.
Using the Power Button to Reset the CV30
Intermec recommends pressing and holding the Power button as
the preferred method to reset the CV30. This method performs a
graceful system shutdown and preserves your data through the
process.
To reset the CV30 using the Power button
•Press and hold the Power button for 5 seconds.
The CV30 systematically shuts down, restarts, and goes
through the initialization process.
Using the Reset Button to Reset the CV30
If performing the preferred reset method of using the Power
button does not restore system operation, it may be necessary to
use the Reset button. Unfortunately, using this method to reset
the CV30 cannot guarantee that cached disk data will be saved,
and transactional data may be lost during the reset.
To reset the CV30 using the Reset button
• Using a small pointed device (such as the end of the stylus),
press the Reset switch on the top of the CV30.
.
802.11
Reset
Do not use force or a sharp object when pressing the reset
button. You may damage the reset button.