User's Manual
Table Of Contents
- Before You Begin
- Chapter 1 - Using the CV30 Fixed Mount Computer
- Chapter 2 - Understanding Windows CE
- Chapter 3 - Configuring the CV30
- Configuring the CV30 Operating Parameters
- Setting Up Ethernet Communications
- Setting Up Bluetooth Communications
- Setting Up 802.11 Radio Communications
- Configuring Security on the CV30
- Understanding the Wireless Network
- Using WPA Security
- Using Static WEP Security
- Using 802.1x Security
- Using LEAP Security
- Choosing Between Funk and Microsoft Security
- Configuring Funk Security Using Intermec Settings
- Configuring Funk Security Using the Profile Wizard
- Configuring WEP Security With Profile Wizard
- Configuring WPA-PSK Security With Profile Wizard
- Configuring WPA2-PSK Security With Profile Wizard
- Configuring PEAP Security With Profile Wizard
- Configuring TLS Security With Profile Wizard
- Configuring TTLS Security With Profile Wizard
- Configuring LEAP Security With Profile Wizard
- Configuring EAP-FAST with Profile Wizard
- Configuring Microsoft Security
- Loading a Certificate
- Disabling Security
- Chapter 4 - Developing and InstallingApplications
- Chapter 5 - Troubleshooting andMaintaining the CV30
- Appendix - Specifications
- Index
Chapter 5 — Troubleshooting and Maintaining the CV30
CV30 Fixed Mount Computer With Windows CE User’s Manual 91
Cleaning the Screen
To keep the CV30 in good working order, you may need to clean
the screen whenever necessary depending on the environment in
which you use the computer. To clean the CV30, use a solution
of ammonia and water.
To clean the screen
1 Disconnect the CV30 from the power supply.
2 Dip a clean towel or rag in the ammonia solution and wring
out the excess. Wipe off the screen. Do not allow any abrasive
material to touch these surfaces.
3 Wipe dry.